Loading...
Items in cart: 0    Current Total: $0.00    VIEW CART
| How to Increase Performance | Read the FAQ | Thundermax Technical Support | Contact Us | Return Policy | Warranty Information | Employment Opportunities |
ArrowImage Bolt On Accessory Packages
ArrowImage Box of Lube Service Kits
ArrowImage Cam Upgrade Packages
ArrowImage Complete Power Packs
ArrowImage CSR Performance Products
ArrowImage Front Wheel Packages
ArrowImage Heat Reduction Packages
ArrowImage Magnetic Drain Plugs
ArrowImage Suspension Packages
ArrowImage Harley FL Touring Models
ArrowImage Harley Softail Models
ArrowImage Harley Dyna Models
ArrowImage Harley Sportster Models
ArrowImage Harley V-Rod Models
ArrowImage Harley Trike Models
ArrowImage Victory Models
ArrowImage Indian Models
ArrowImage Accessories
ArrowImage Air Cleaners
ArrowImage Air Filters-Replacement
ArrowImage Apparel
ArrowImage Baffles
ArrowImage Batteries
ArrowImage Brake & Shifter Arms
ArrowImage C.A.R.B. Approved Products
ArrowImage Carburetors
ArrowImage Chrome
ArrowImage Transmission and Driveline
ArrowImage Covers-Derby, Cam, Transmission, Fuel Door Etc
ArrowImage EFI Systems-Power Commanders/Thundermax Auto Tune
ArrowImage Engine Upgrades
ArrowImage Exhaust - Full Systems
ArrowImage Exhaust - Head Pipes
ArrowImage Exhaust - Slip-On Mufflers
ArrowImage Exhaust Tips
ArrowImage Floorboards & Foot Pegs
ArrowImage Gift Certificates
ArrowImage Grips & Levers
ArrowImage Handlebars
ArrowImage Heat Reduction Products
ArrowImage Ignition Systems
ArrowImage Installation Products
ArrowImage Lighting
ArrowImage Lubricants & Chemicals
ArrowImage Luggage & Saddlebags
ArrowImage Magnetic Drain Plugs
ArrowImage Oil Coolers/Oil Pans
ArrowImage Oil Filters
ArrowImage Rear Drive Belts
ArrowImage Security Products
ArrowImage Spark Plugs
ArrowImage Suspension
ArrowImage Throttle Bodies & Injectors
ArrowImage Tools
ArrowImage Wheel Chocks, Bike Stands and Towing
ArrowImage Front Fairing & Windshield Accessories
ArrowImage Honda Models
ArrowImage Kawasaki Models
ArrowImage Suzuki Models
ArrowImage Yamaha Models
Left menu space
Left space
  Accessories  >  Other Accessories
Feuling Vented Dipstick for Harley Milwaukee 8 Touring Models



Feuling Vented Dipstick for Harley Milwaukee 8 Touring Models

Feuling Vented Dipstick for Harley Milwaukee 8 Touring Models

Sku # : 3088
Our Price :
$279.95
Finish
:
Qty
:


Product Detail

This polished billet dipstick screws into the oil fill spout just like the factory dipstick. This dipstick removes unwanted build up of blow by which is found in engines with excessive leakdown through the rings/cylinders and large bore engines. Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help minimize blow by.

We provide 2 venting option styles with this dipstick
OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.

OPTION 2.) Quick disconnect fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil.

For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.

*This dipstick does get hot, use a glove when checking oil level


Checking oil level
6.) There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).

FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand).

FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright).



OIL LEVEL - DO NOT OVERFILL OIL TANK
It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.

Note: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

We recommend the following steps to achieve proper oil level:
1. Check cold oil level.
2. Ride the bike until operating temperature is reached.
3. Shut the bike off while still in the upright position. (This insures an accurate reading)
4. Once the bike is on the kickstand check oil level.
5. Add or remove oil as needed

Recently Viewed Items




Feuling Vented Dipstick for Harley Milwaukee 8 Touring Models
$279.95
Right right-line
Cycle Solutions Inc., 3585 S 600 E, Hartford City, IN 47348 Tel No: 765-768-6000
Sitemap | Related Info | References
E-commerce Simplified - Turn key e-commerce solutions by Flashecom.NET Turnkey E-Commerce Solutions by Flashecom.NET - Shopping cart, e-commerce, content management, custom design, marketing & SEO - www.flashecom.net